ER5183 is the aluminum magnesium alloy wire with designation:
AlMg4.5Mn0.7.
Features:
Welding Filler Wire
Designed to meet the tensile
strength requirements of high magnesium alloys
For 5083 and 5654 base
materials
Typical Applications
5XXX alloys
Marine fabrication and repair
Cryogenic tanks
Shipbuilding and other high
strength structural aluminum applications
Bicycle frames
Automotive bumpers and supports
Structural frames in the shipbuilding industry
High speed groove welds on formed truck
panels
Multi-pass fillet and lap welds on 6XXX series base materials
Robotic fillet welds on trailer tanks requiring minimal post-weld clean
up
Welding Positions: All
Shielding Gas: 100% Argon Mixed Shielding Gas
|
Chemical
Composition (%) |
|||||||||
|
Elements |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Al |
|
Requirements |
0.4 |
0.4 |
0.1 |
0.5-1.0 |
4.3-5.2 |
0.05-0.25 |
0.25 |
0.15 |
Balance |
Chemical composition standard: GB/T3190-1998
Wire standard: GB10858-2008, ANSI/AWS A5.10-92
Certificate: ISO9001:2008
|
Physical Properties |
||||||||
|
Test
Name |
Melt
Temperature |
Electrical
Conductivity |
Heat
Conductivity |
Tensile
Strength |
Yield
Strength |
Extensibility |
Linear
Expansivity |
Density |
|
|
（℃） |
%IACS |
W/m.k |
(MPa) |
(MPa) |
(%) |
10-6/K（20-100℃） |
g/cm3 |
|
Requirements |
575～640 |
29 |
210-230 |
275~300 |
120~140 |
15~20 |
24.2 |
2.66 |
Packing:
Mig: 7kg/ spool; 9kg/spool; 20kg/coil; 144 spools/ pallet;
Tig-1M(L): 5kg/bag *2bags/ carton; 10kg/bag /carton; 100 cartons/
pallet;
Package with label and material test report.
